Spektrum DX8 Radio Transmitter with AR8000 Receiver

Overview

The much anticipated Spektrum DX8 Radio is is now expected to land early September and they are going to go quick. Don't be left out! Make sure to be the first to get your hands on one of these great radios!

Spektrum innovation gives RC pilots a new level of security and ease-of-use with the DX8. In addition to providing the benefits of Spektrum's patent-pending DSM2 technology, the DX8 introduces advances in software, telemetry and ergonomics you simply won't find in any other 8-channel system.

The DX8 is Spektrum's first aircraft system that incorporates integrated telemetry. The transmitter's screen displays real-time telemetry including receiver battery voltage, flight log data and signal quality. External sensors allow rpm, external voltage and temperature to be displayed on screen in real time. Alarms can be programmed to warn of low battery, over temperature, exceeded rpm and diminished RF signal strength.

The DX8 offers sophisticated programming to meet the demands of even the most experienced airplane and helicopter pilots. An easy-to-use rolling selector combined with intuitive software makes setting up models quick and easy. The DX8 is SD-card compatible allowing an infinite number of models to be stored and transferred. Plus firmware updates can be downloaded from the web providing you with the latest software upgrades at the click of a mouse.

Spektrum DX8 Features

• 11ms Frame Rate for ultra high speed responce rate.
• Large area, 128x64 resolution screen allows clear menus and easy operation
• Aircraft and Helicopter modes
• 2000mAh Ni-MH AA battery welded pack for extended run times; security and durability of heatshrink/welded pack.
• 2048 Resolution. Thats 2048 steps of travel for each servo; smooth transition from stick input to servo movement.
• 30 Model Memory. Storage space for additional models.
• Data Transfer. Transfer model programming/setup data to between radios.
• DSM2 Dualink Technology. Second generation Digital Spread Spectrum Modulation, superior path diversity.
• Electronic "E Ring". Electronically prevents overdriving the cyclic servos.
• Included AR8000 8CH Hi-Speed Receiver. Full range 8CH receiver is compatible with the Telemetry Module capable of sending real time telemetry data to the transmitter.
• Mode Selectable. Easily change the radio between modes 1 through 4 both in software and hardware.
• ModelMatch technology prevents wrong model syndrome.
• Integrated range check function displays flight log data, (Antenna Fades, Frame Losses, and Holds).
• Real Time Telemetry. Radio will display real time monitoring of flight log date (Antenna Fades, Frame Losses, and Holds) as well as receiver pack voltage.
• SD/MMC Compatible. Increased model storage via secure digital or multi media card data storage.
• ServoSync. Synchronised servo movement for CCPM or Dual Elevators.
• Timer (start on Throttle up). Two options (Up-Timer) and (Down-Timer); programmable to either the trainer switch, or throttle stick.
• 12V DC w/Multi-Country plug types. Convenience and ease of use.
• 3 Wing Types. Dual Aileron, V-Tail, and Elevon mixing options available.
• 5 Point Graphic Pitch Curve
• 5 Point Graphic Tail Curve
• 6 Programmable Airplane Mixes
• Active gain control. Allows for inflight adjustments of the gyro gain settings.
• Flap Delay w/elevator compensation. Adjustable control of flap servo speed
• France Mode Selectable. The region setting screen is used to allow the DX8 to be in compliance worldwide.
• Language Select. Change language displayed on the screen; English, Spanish, and French, German, and Italian will be supported.
• Low battery voltage warning with both an audible and visual warning.
• Programmable Flap System. Allows for elevator and flap positions to be programmed for landing and takeoff.
• Swash plate timing. Allows for electronic correction of swash plate phasing; Helps helicopter perform better.
• Telemetry warning screen(Audible/Buzzer). Provides both tone and vibration alerts.
• Timer Integrated. Tracks total on time of transmitter.
• Trainer Mode. Allows for the use of a trainer cord for teaching student pilots how to fly.
• 3 Airplane Flight Modes. Allows versatility in programming/set-ups/installations.
• 3 Programmable Dual Rates (Aileron, Rudder and Elevator)
• 3 Programmable Helicopter Mixes
• 4 Micro Second Trim Steps. Changes the servo 4 micro seconds per trim step
• 4 Swash Plate Types. Swash plate options to match the particular swashplate of the helicopter.
• 5 Point Graphic Throttle Curve. Allows for adjustments of the throttle to optimise engine/motor RPM.
• Contrast adjustment. Allows for screen contrast adjusment for optimised viewing of the display.
• Differential. Precise electronic adjustment of aileron travel when flaperon or elevon wing type is actived .
• Digital trims w/dual speed trim scroll. Convenience and ease of use.
• Exponential throw. Allows for greater control; allows control/stick movements that are less/more sensitve around center stick position.
• French Bandwidth Capable. User enabled bandwidth restriction; Allows for compliance with French regulatory restrictions.
• Gyro Adjust, Normal, Stunt & Hold. Allows for seperate gyro gain values in each flight mode.
• Model Copy. Copy model settings from one model memory to another.
• Model Name. Name each model memory.
• Model-Reset. Allows the user to reset each model memory to the default settings.
• Roller/selector user interface. Convenience and ease of use.
• Servo Monitor. Displays servo movement direction when different programming functions, sticks and/or switches are moved.
• Servo Reverse
• Sub Trim
• Swash plate expo
• Swash Plate Mix. Allows individual setup of cyclic servos
• Switch Select. Allows for user selectable/changeable switch locations
• Throttle Cut. The throttle channel moves to a preprogrammed position (low throttle, low trim) allowing the safe and convenient shut down of the engine.
• Travel adjust (End Point Adjustment).
• Warning Screen Air. Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, GEAR, FLAPS, F.MODE)
• Warning Screen Heli. Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, STUNT, HOLD).

Specifications

Image Gallery